MA Fire and Security
    Knowledge Centre

    Fire Alarm Compliance for Landlords

    What the law requires from residential landlords — smoke alarm regulations for rented property, HMO fire detection requirements, BS 5839-6 grades and the penalties for non-compliance.

    The Regulatory Framework for Landlords

    Landlords letting residential property face fire detection obligations from several overlapping pieces of legislation and regulation:

    • The Smoke and Carbon Monoxide Alarm (Amendment) Regulations 2022 — apply to all privately rented residential premises in England
    • BS 5839-6:2019 — the British Standard for fire detection in domestic premises, which sets out grades and categories for different types of dwelling
    • The Management of Houses in Multiple Occupation (England) Regulations 2006 — specific requirements for licensed HMOs
    • The Regulatory Reform (Fire Safety) Order 2005 — applies to common parts of HMOs and multi-occupancy buildings
    • Local authority licensing conditions — many local authorities impose additional fire safety conditions as part of HMO licensing

    The Smoke and Carbon Monoxide Alarm Regulations 2022

    These regulations, which came into force on 1 October 2022, require that:

    • At least one smoke alarm is installed on each storey of the premises where there is a room used as living accommodation
    • At least one carbon monoxide alarm is installed in any room used as living accommodation which contains a fixed combustion appliance (excluding gas cookers)
    • All alarms must be in working order at the start of each new tenancy
    • Landlords must repair or replace alarms as soon as reasonably practicable after being informed by the tenant that they are faulty

    The regulations apply to social housing as well as private rented sector landlords. Failure to comply can result in a remedial notice from the local authority and, if not acted upon, a civil penalty of up to £5,000.

    BS 5839-6:2019 — Grades for Domestic Properties

    BS 5839-6 defines the grades and categories that apply to fire detection systems in domestic premises. For rented property, the most commonly specified grades are:

    Grade A

    A fire detection and alarm system with a control panel, addressable or conventional, with detectors wired back to the panel. The highest standard — required for the largest and highest-risk domestic premises such as large HMOs.

    Typically used: Larger HMOs, houses of four or more storeys, high-risk properties

    Grade D1

    Mains-powered detectors with integral sounders and a tamper-proof standby battery, interconnected. The interconnection means all sounders activate when any detector is triggered.

    Typically used: Most single-family rented properties of more than one storey; standard specification for most landlords

    Grade D2

    Mains-powered detectors with rechargeable batteries (not tamper-proof). Lower standard than D1; only acceptable where D1 is impractical.

    Typically used: Specific limited circumstances only

    Grade F1

    Battery-only alarms with non-rechargeable batteries. The lowest acceptable grade. Only appropriate where mains power cannot be provided.

    Typically used: Properties where mains wiring is genuinely impractical

    HMO Fire Alarm Requirements

    Houses in Multiple Occupation (HMOs) have more stringent fire safety requirements than single-family properties. The requirements depend on the type and size of the HMO:

    • Small HMOs (up to two storeys, up to four occupants) — typically Grade D, Category LD2 or LD3. Detectors in all common areas, kitchen and hallways.
    • Larger HMOs (three or more storeys, or five or more occupants) — licensing required; fire safety conditions specified by the local authority. Grade A, Category LD1 or LD2 systems are common requirements.
    • Common parts of HMOs — treated as non-domestic premises under the RRO. The responsible person must conduct a fire risk assessment of the common areas.
    • Bedsit-style HMOs with shared facilities — higher risk due to lack of compartmentation. Grade A systems typically required.

    Local authorities vary in their licensing conditions. Always check with the licensing authority for the specific requirements that apply to your property.

    Categories Under BS 5839-6

    As well as grades, BS 5839-6 defines categories of coverage:

    • LD1 — detectors in all circulation areas (hallways, landings), all rooms where fire could start, and all escape routes. Highest coverage.
    • LD2 — detectors in all circulation areas plus rooms presenting the highest risk (typically kitchen and living room).
    • LD3 — detectors in circulation areas only (hallways and landings). Minimum acceptable in most rented property.

    Penalties for Non-Compliance

    Failure to comply with smoke alarm regulations can result in a civil penalty of up to £5,000 per breach. Failure to comply with HMO licensing conditions (including fire safety) can result in unlimited fines, a banning order or prosecution. Insurance may also be invalidated.

    Landlord Fire Alarm Requirements

    Installations for rented properties and HMOs developed with reference to applicable BS 5839-6 provisions.