MA Fire and Security
    Knowledge Centre

    BS 5839-1:2025 Explained

    A plain-English guide to the British Standard that governs fire detection and alarm systems in non-domestic buildings — what it covers, who it applies to, and what changed in the 2025 edition.

    What is BS 5839-1?

    BS 5839-1 is the British Standard code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in non-domestic premises. It is published by the British Standards Institution (BSI) and is the primary technical reference for fire alarm installers, fire risk assessors, building control bodies and insurers across the UK.

    The standard does not carry the force of law in itself — but it is referenced in statutory guidance (such as Approved Document B and the Regulatory Reform (Fire Safety) Order 2005 guidance documents) and is widely treated as the benchmark for what constitutes a compliant, fit-for-purpose fire alarm system in any non-domestic building.

    What Does BS 5839-1:2025 Cover?

    The 2025 edition addresses the entire lifecycle of a fire alarm system:

    • System design — how to assess the risk, determine the appropriate category, select and site detectors, design alarm zones and plan wiring
    • Equipment selection — detector types, control equipment, sounders, beacons and interfaces with other building systems
    • Installation — wiring standards, cable routing, fixing and labelling requirements
    • Commissioning — testing procedures before handover, documentation and certification requirements
    • Maintenance — routine testing intervals, inspection schedules, record-keeping and false alarm management
    • System categories — from Category M (manual only) through L5, L4, L3, L2 to L1 (full coverage)

    Who Does It Apply To?

    BS 5839-1 applies to all non-domestic premises — offices, warehouses, retail, healthcare, hospitality, education, industrial and public buildings. It does not apply to domestic dwellings, which are covered by BS 5839-6.

    It applies to new systems and to modifications of existing systems. Where an existing system is extended or significantly altered, the altered portion — and in some cases the whole system — should be brought up to the current standard.

    What Changed in the 2025 Edition?

    The 2025 edition updated the 2017 version. Key changes include:

    • Wireless system guidance — more detailed requirements for wireless and hybrid systems, reflecting their growing use in retrofits and listed buildings
    • False alarm management — strengthened requirements for reducing unwanted alarms, including cause-and-effect programming and investigation procedures
    • Remote monitoring and connectivity — guidance on IP-based monitoring, remote access and cybersecurity considerations for networked fire alarm systems
    • Detector siting updates — revised guidance on detector positioning in modern open-plan and complex building layouts
    • Evacuation alert systems — updated guidance following the Grenfell Tower Inquiry recommendations on phased evacuation in high-rise residential buildings

    The System Categories Under BS 5839-1

    One of the most important aspects of the standard is its classification of fire alarm systems by category:

    Category M

    Manual system — break-glass call points only, no automatic detection. Minimum acceptable standard for some low-risk premises.

    Category L5

    Automatic detection in one or more defined areas of specific risk, as identified by a fire risk assessment.

    Category L4

    Detection within escape routes — corridors, stairways and circulation areas.

    Category L3

    Detection in escape routes plus rooms or spaces that open directly onto them, providing earlier warning.

    Category L2

    Detection in defined areas of high fire risk, plus all escape routes. Higher level of life-safety protection.

    Category L1

    The highest category — detection installed throughout all areas of the building, including roof spaces and voids. Maximum early warning for life safety.

    Why Compliance Matters

    A fire alarm system that is not designed and installed to BS 5839-1 may fail to detect a fire in time to allow safe evacuation. Beyond the life-safety risk, non-compliant systems can result in:

    • Insurance claims being refused or reduced
    • Enforcement action from the fire authority or local building control
    • Personal liability for the responsible person under the Regulatory Reform (Fire Safety) Order 2005
    • Difficulty obtaining certificates of compliance required by lenders, insurers or tenants

    Note on Legislation

    BS 5839-1 is a code of practice, not a law. However, failing to comply with it may be used as evidence that the responsible person has failed to take reasonable fire precautions under the Regulatory Reform (Fire Safety) Order 2005.

    How MA Fire and Security Systems Works to BS 5839-1:2025

    Every fire alarm system we design, install and maintain is produced in accordance with BS 5839-1:2025. Our designs are risk-based, our installation procedures are documented, and every system is fully commissioned and tested before handover. We issue a commissioning certificate referencing the applicable standard and edition.

    Our engineers are trained to the current standard and our maintenance programmes are structured around its service interval requirements.

    Talk to a Fire Alarm Specialist

    Free site surveys and BS 5839-1:2025-informed design for non-domestic premises.